It’s vital for homeowners to take action before a leaning tree falls as this could potentially result in damage to nearby structures and objects. Use the guide below to properly cut a leaning tree down.
How To Fell A Leaning Tree
The first part of this process is determining whether or not the tree can be saved. You can stabilize a leaning tree with a good root system intact with the use of cables. It’s best to cut the tree down in the event the roots look damaged or weak.
Inspect the tree for any storm damage like broken branches before choosing to cut it down. Follow these steps to properly fell the tree:
- Always plan your approach to the tree cutting process carefully.
- Refrain from damaging anything nearby.
- Check the surrounding area and map out a safe zone on the ground.
- Determine the direction you wish the tree to fall.
- Make sure the tree will fall away from any structures or objects.
- Immediately dispose of any debris after the tree has been cut down.
How To Fell A Leaning Tree In The Opposite Direction
Felling a leaning tree in the opposite direction calls for a different technique altogether. Use these steps below:
- At waist-high, tie a rope around the trunk of the tree.
- Ensure the rope is taut and secure.
- In the side of the trunk that’s facing away from the direction you wish the tree to fall, cut a notch.
- This notch should be cut about one-third of the way through your trunk.
- Cut one more notch into the opposite side of trunk directly above where the first cut ends.
- Ensure this cut is perpendicular to the first cut.
- Begin cutting the tree down from the top.
- Angle the cut in the direction you wish the tree to fall.
- Use your rope to guide the tree in the proper direction.
- Always have at least one helper for this task.
Liberty Tree Care Offers Tree Trimming in Scottsdale, Arizona
If you are searching for tree trimming in Scottsdale, Mesa or Tempe, Liberty Tree Experts can help! Get a free tree trimming quote by giving Liberty a call today at 480-482-9374.